SMOK MAG P3 230W TC Mod with TFV16 Tank Starter Kit

The SMOK MAG P3 Vape Mod brings back the classic trigger fire button with a new durable construction. The MAG P3 is designed to be shock, water, and dust resistant for the ultimate outdoors experience. The MAG P3 is powered by the IQ-M chipset which can fire up to 230 watts and supports multiple temperature control modes. The MAG P3 features a backside carbon fiber panel along with a 1.9" touchscreen display screen that is easy to read and understand. The MAG P3 features a unique pass code lock system along with a battery panel lock system. The MAG P3 requires (2) high amp 18650 batteries (sold separately) and may be charged via the micro USB charging port.

The SMOK TFV16 is the ultimate tank for flavor and vapor production. The TFV16 features a huge 9.0ml e-Liquid capacity that is easily refilled using the top rotary fill design. The TFV16 ultra wide dual airflow slots that may be adjusted for incredible airflow and vapor production. The TFV16 features a glass tank design along with a stainless steel construction. The TFV16 is powered by nexMESH technology designed for a balance between flavor and vapor production.

Quick Links:
Our Premium Salt Based e-Liquids
Our Premium e-Liquid
Replacement Atomizer Heads

Features and Specs for SMOK MAG P3 Mod:

• Powered by IQ-M Chipset
• Shock Resistant
• Water Resistant - IP67 Rating
• Dust Resistant - IP67 Rating
• Dimensions: 3-9/16" x 2-11/16" x 1-1/4" (Without Tank)
• Spring Loaded 510 Contact Pin
• Output Wattage: 1.0 - 230.0W
• Temperature Control: Nickel 200 (Ni200), Titanium (Ti), Stainless Steel 316 (SS316), TCR Mode
• Temperature Control: 100 - 315C / 200 - 600F
• Resistance Range: 0.1 - 2.5ohm for Wattage Mode
• Resistance Range: 0.05 - 2.0ohm for Temperature Control Mode
• Instant Firing Speed: 0.001s
• Trigger Fire Button
• Backside Carbon Fiber Panel
• Pass Code Lock System
• Slide to Unlock Function
  
• 1.9" Touchscreen Display Screen
• Battery Panel Lock System
  
• Requires (2) High Amp 18650 Batteries (Sold Separately)
• *External charger recommended for optimal charging*
• Micro USB Charging Port with Silicone Plug
• Short Circuit Protection

Please note: Temperature control requires the use of nickel, titanium or stainless coils.

Features and Specs for SMOK TFV16 Tank:

• Dimensions: 2-7/16" x 1-1/16" (Including Drip Tip and Threads)
• Diameter: 32mm
• 510 Threaded
• E-Liquid Capacity: 9.0ml
• Top Rotary Fill Design
• Bulb Glass Tube
• Stainless Steel Construction
• Wide Bore Resin Drip Tip
• Ultra Wide Dual Airflow Slots
• Bottom Adjustable Airflow Control Valve
• Powered by nexMESH Technology
• Includes (1) TFV16 Conical Mesh Coil 0.2ohm Atomizer Head (Pre-installed) (60 - 85W)
• Includes (1) TFV16 Dual Mesh Coil 0.12ohm Atomizer Head (80 - 160W)
• Includes Protective Silicone Sleeve
  

---

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.

For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.

Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Battery Safety Warning:

Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.

Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.

Always charge in or on a fire-proof surface. Never leave charging batteries unattended.

Do not modify batteries or chargers in any shape or form.

Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.

Store your batteries away from the sun and heat to prevent overheating your batteries.

Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.

Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.

myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.