SMOK Morph 2 Mod with TFV18 Tank Starter Kit

From the makers of the Smok Morph 219 comes the SMOK Morph 2 Kit it is a powerful and sturdy vape kit with a soft leather and durable zinc alloy frame construction. The Morph 2 features an updated and redesigned user interface for an easy to use vaping experience. The Morph 2 is powered by the IQ-S chip which can fire up to 230 watts and supports multiple temperature control modes. The Smok Morph 2 also features a new adaptive power function that automatically adjusts wattage according to the current battery life that prolongs endurance and maintains a stable output. The Morph 2 is powered by (2) high amp 18650 batteries (sold separately) and may be quickly charged via the front USB Type-C charging port.

The SMOK TFV18 Tank features a 7.5ml e-Liquid capacity that may be refilled using the top rotary fill design. The TFV18 Tank features a durable stainless steel construction with a unique wide bore resin drip tip that is sure to stand out. The TFV18 Tank features an elevated tank base which allows for even more airflow. The TFV18 tank features ultra wide dual airflow slots that may be adjusted for incredible airflow and vapor production. The TFV18 Tank utilizes both TFV18 Replacement atomizer heads and the TFV16 Replacement atomizer heads.

Quick Links:
Our Premium e-Liquid
TFV16 Replacment Atomizer Heads
TFV18 Replacement Atomizer Heads


Features and Specs for SMOK Morph 2 Mod:

• Powered by IQ-S Chip
• Dimensions: 88mm x 47.5mm x 31.7mm (Without Tank)
• Output Wattage: 1.0 - 230.0W
• Temperature Control: Nickel 200 (Ni200), Titanium (Ti), Stainless Steel 316 (SS), TCR
• Temperature Control Range: 200 - 600F / 100 - 315C
• Resistance Range: 0.1 - 2.5ohm for Wattage Mode
  
• Resistance Range: 0.05 - 2.0ohm for Temperature Control Mode
• Instant Firing Speed: 0.001s
• Adaptive Power Function
• 0.96" Display Screen
• Updated and Redesigned User Interface
• Zinc Alloy and Leather Construction
• Requires (2) High Amp 18650 Batteries (Sold Separately)
• *We recommend an external charger for optimal charging*
• Front Micro USB Charging Port

Please note: Temperature control requires the use of nickel, titanium or stainless coils.

Features and Specs for SMOK TFV18 Tank:

• Dimensions: 31.6mm x 66.3mm (Including Drip Tip and Threads)
• Diameter: 31.6mm Base Diameter
• 510 Threaded
• E-Liquid Capacity:

7.5ml (with TFV18 Meshed 0.33ohm Coil)
6.5ml (with TFV18 Dual Meshed 0.15ohm Coil)

• Top Rotary Fill Design
• Bulb Glass Tube
• Stainless Steel Construction
• Wide Bore Resin Drip Tip
• Elevated Tank Base
• Ultra Wide Dual Airflow Slots
• Bottom Adjustable Airflow Control Valve
• TFV18 Meshed 0.33ohm Atomizer Head (Pre-installed)
• TFV18 Dual Meshed 0.15ohm Atomizer Head

---

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.

For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.

Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Battery Safety Warning:

Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.

Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.

Always charge in or on a fire-proof surface. Never leave charging batteries unattended.

Do not modify batteries or chargers in any shape or form.

Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.

Store your batteries away from the sun and heat to prevent overheating your batteries.

Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.

Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.

myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.